BillDownUnder
Senior Member
Last Activity: Yesterday, 06:25 PM
Joined: 10-24-2004
Location: Perth, Australia
-
Charlie, for what it is worth, the PR5 I have on the front gives me no trouble whatsoever (12,000km +).... -
Haven't ridden for over a week here, too hot, temperatures around 40 Centigrade (105F) for the last week, here in West Oz. Withdrawal symptoms.Leave a comment:
-
Charlie, a bit of heat on the outside may help to get the old one out.
New bearings - put them in the freezer for a while, and use a driver of sorts....Leave a comment:
-
Illegal in this country, and besides, it apprently doesn't work.
Is the troll being removed?Leave a comment:
-
What ^ he said ...........
I'm keeping my 2 Kawis, my Toyotas, my Sony TVs, and so on.
However, I fully understand that the...Last edited by BillDownUnder; 12-08-2019, 09:19 PM.Leave a comment:
-
Yes, that is correct. I already have a set on the ZZR, and they are fine. I've ordered a set for the ZRX.
They come from either Taiwan or China,...Leave a comment:
-
Charlie, when the Arashi rear disc arrives (slow boat from China) in 3 or so weeks, I will report back.
For the front I went with these:...Leave a comment:
-
Thanks mate, good to know.
I'll order the same Arashi rear disc as for the ZRX.Leave a comment:
-
It seems that Arashi don't do a rear rotor for the ZZR.
Any that they list for that model have 4 mount points, instead of the required 5.
...Leave a comment:
-
Rear brake rotor
I need to replace the rear rotor on my '02 1200.
OEM is quite pricey, so I am considering Arashi.
Has anyone fitted one of those on the rear... -
Could be your idle circuit that needs a clean-out.
Have you tried riding at speed, and applying full choke for about 15 seconds?Leave a comment:
No activity results to display
Leave a comment: